Props and clutter

Industrial Pipes Pipe03 3D model

Industrial Pipes Pipe03 from the Poly Haven Modern pack in TerrainTale's library. Scatter it to dress a scene or give the fight cover; it stands on whatever is under it.

Folder
Props and clutter
Pack
Poly Haven Modern
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
2 ft by 6 in, 4.5 ft tall (covers about 1 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
134 KB
Industrial Pipes Pipe03, a props and clutter 3D model for D&D battle maps

About this model

An S-bend section of dark green industrial pipe with flanged ends, offsetting the flow sideways. It measures about 2 ft wide and 4.5 ft tall. The paint is chipped at the joints, with a little rust showing through. Combine it with the straight lengths and elbows to route a pipe around a doorway or over a low beam, and the room starts to look like real plant rather than a bare floor.

Use it to join straight pipe runs at different positions on a wall, making plumbing look believable. On a map the bend breaks up a straight line of pipes and creates small nooks behind it. It suits engine rooms, sewers and old industrial basements.

Ideas for the table

  • A small creature lives in the nook behind the bent pipe.
  • The bend has rusted through and drips a steady stream onto the floor.
  • A clue is wedged behind the S-bend where nobody thought to look.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.