Props and clutter

Concrete Barrier 2 3D model

Concrete Barrier 2 from the Poly Haven Modern pack in TerrainTale's library. Scatter it to dress a scene or give the fight cover; it stands on whatever is under it.

Folder
Props and clutter
Pack
Poly Haven Modern
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
5 ft by 1.5 ft, 3.5 ft tall (covers about 1 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
412 KB
Concrete Barrier 2, a props and clutter 3D model for D&D battle maps

About this model

A taller concrete barrier with a pale, dusty surface, steel lifting loops on top and a slightly narrower profile. It looks heavily used and patched. It is about 5 ft long, 1.5 ft deep and 3.5 ft tall, filling one square lengthwise.

Use it on motorways, building sites, border crossings and secure compounds. It gives solid cover and blocks movement for anyone not willing to climb. A line of these quickly turns a street into a battle position. The lifting loops make it plausible to swing one into place with a crane. Mix it with the first barrier type so a line looks like it was assembled from whatever was available.

Ideas for the table

  • Protesters climb onto concrete barriers outside parliament while police push them back.
  • A gang hides behind barriers at a closed road and fires at passing cars.
  • The party uses a crane to lift a barrier and block an escape route.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.