Walls, doors and windows

Fort Wall Thin Gate 3D model

Fort Wall Thin Gate from the Poly Haven Props pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
9 ft by 25 ft, 29 ft tall (covers about 2 by 5 squares)
Format
GLB (binary glTF 2.0)
File size
1.5 MB
Fort Wall Thin Gate, a walls, doors and windows 3D model for D&D battle maps

About this model

A thin wall section with an arched gateway through its middle and battlements on top. It is about 9 ft thick, 25 ft long and 29 ft tall, with a passage wide enough for people and a cart.

This is the way in and out of a fort, so every siege or infiltration will centre on it. Defenders on top can shoot down at anyone passing through, and the narrow arch makes a natural choke point. Add a portcullis or a gate door to make breaking in a real goal.

Ideas for the table

  • The party must hold the gate arch against a horde while the villagers flee into the fort.
  • Disguised as merchants, the party bluffs its way through the gate past suspicious guards.
  • A battering ram hammers at the gate while defenders pour boiling oil from above.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.