Walls, doors and windows

Roller Shutter Window 3D model

Roller Shutter Window from the Poly Haven Modern pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Modern
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
17 ft by 1 ft, 6 ft tall (covers about 3 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
119 KB
Roller Shutter Window, a walls, doors and windows 3D model for D&D battle maps

About this model

A wide steel roller shutter for a shop window, shown closed and with graffiti on one panel. It is a long, low shutter with a box at the top. It is about 17 ft wide, three squares and a bit, 6 ft tall and a foot deep. One panel carries bright graffiti. A thin line of rust shows along the bottom rail where rain collects.

Use it on shop fronts, kiosks and market stalls. A lowered shutter turns a window into a wall. Lifting it opens a firing line or an escape route.

Ideas for the table

  • The shopkeeper pulls the shutter down as the riot reaches the street.
  • Through a gap in the shutter the party glimpses the robbery.
  • A forced shutter shows the shop was looted overnight.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.