Walls, doors and windows

Fort Wall Stairs Straight 3D model

Fort Wall Stairs Straight from the Poly Haven Props pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
12 ft by 50 ft, 25.5 ft tall (covers about 2 by 10 squares)
Format
GLB (binary glTF 2.0)
File size
1.5 MB
Fort Wall Stairs Straight, a walls, doors and windows 3D model for D&D battle maps

About this model

A straight stone wall section with a stair ramp rising along its length to the parapet, built of rough masonry. It is about 12 ft wide, 50 ft long and 25.5 ft tall, ten squares long.

Use it to give defenders access to the walkway on top of a castle wall. In a siege, the stairs are a key route that attackers must take or hold. Fights on the stair force characters into a line and give the higher combatant the advantage of the high ground, which makes it a dramatic place for a duel.

Ideas for the table

  • The party holds the stair to the parapet while the gate below is broken.
  • An enemy champion blocks the top of the stair, challenging the party's best fighter.
  • Smoke rolls up the stair from the burning courtyard as the party races to the battlements.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.