Walls, doors and windows

Fort Wall Walkway Straight 2 3D model

Fort Wall Walkway Straight 2 from the Poly Haven Props pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
10.5 ft by 50 ft, 26 ft tall (covers about 2 by 10 squares)
Format
GLB (binary glTF 2.0)
File size
1.4 MB
Fort Wall Walkway Straight 2, a walls, doors and windows 3D model for D&D battle maps

About this model

A plain straight length of fortified wall in irregular grey stone with a flat parapet line along the top. It runs about 50 ft long, ten squares, with a thickness of around 10.5 ft and a height of roughly 26 ft, a little narrower than the arched variant.

Use it for long unbroken stretches of curtain wall around a town, a keep or a military camp. With no openings, it is a clean barrier that controls where fights happen: along the top, at the gate, or at whatever breach the DM decides to put in. Lined up with corner and end pieces it builds a complete defensive circuit in a few placements.

Ideas for the table

  • A hidden postern door somewhere along this wall is the party's only way into the besieged town.
  • Wyverns land on top of the wall one after another, and the guards beg the characters to clear the walkway.
  • A rival adventuring group races the party along the top of the wall to reach a signal horn first.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.