Walls, doors and windows

Fort Wall Thin Corner 3 3D model

Fort Wall Thin Corner 3 from the Poly Haven Props pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
20 ft by 15.5 ft, 26.5 ft tall (covers about 4 by 3 squares)
Format
GLB (binary glTF 2.0)
File size
1.4 MB
Fort Wall Thin Corner 3, a walls, doors and windows 3D model for D&D battle maps

About this model

A rounded corner section for a thin wall, with a curved outer face and crenellations, built of weathered stone. It is about 20 ft by 15.5 ft and 26.5 ft tall.

Use it to give a wall a softer turn, a bastion or a rounded angle in an older fort. Rounded corners are harder to climb and give defenders a wider field of view. It blocks line of sight and movement completely. It also suits an older or more refined castle, where rounded bastions show a designer who planned for siege weapons. Mix it with square corners to suggest a fort rebuilt over several eras.

Ideas for the table

  • Defenders on the rounded bastion can see the whole valley approach.
  • A crack in the curved wall has been patched badly, and a strong hit could bring it down.
  • A wyvern lands on the rounded corner during the siege, scattering the archers.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.