Stairs, pillars and structure

Wooden Ladder 3D model

Wooden Ladder from the Poly Haven Props pack in TerrainTale's library. Place it on the grid to add height or cover; the ruler counts the elevation it creates.

Folder
Stairs, pillars and structure
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
3 ft by 1.5 ft, 4.5 ft tall (covers about 1 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
395 KB
Wooden Ladder, a stairs, pillars and structure 3D model for D&D battle maps

About this model

An A-frame stepladder made of grey weathered wood, with flat rungs and a hinged top. It is about 3 ft wide, 1.5 ft deep and 4.5 ft high, standing in one square. One rung is lighter than the others, perhaps a later repair.

Use it in a library, a barn, a workshop, a painter's studio or a storeroom with high shelves. It lets characters reach higher shelves or a loft hatch. In a fight it is something to climb for a better angle, or something to kick over under a careless foe. Its splayed legs need a flat spot, so set it on level ground.

Ideas for the table

  • A thief balances on the stepladder in the library, reaching for a book on the top shelf.
  • Knocking the stepladder from under a goblin sends it sprawling into a stack of crates.
  • A painter left the ladder under a ceiling hatch, which leads to a hidden attic room.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.