Stairs, pillars and structure

Pier Section 5 3D model

Pier Section 5 from the Poly Haven Props pack in TerrainTale's library. Place it on the grid to add height or cover; the ruler counts the elevation it creates.

Folder
Stairs, pillars and structure
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
10 ft by 1.5 ft, 23 ft tall (covers about 2 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
419 KB
Pier Section 5, a stairs, pillars and structure 3D model for D&D battle maps

About this model

A tall upright frame of two posts linked by beams, like a gantry or the end supports of a pier. The wood is weathered grey. It is about 10 ft wide and 1.5 ft deep, and roughly 23 ft high, much taller than the other pier pieces.

Use it as a mooring frame, a crane support at a dock, a gallows-like structure or the entrance arch to a jetty. Its height makes it a landmark visible across the map. A rope and pulley here could lift cargo or a captured prisoner.

Ideas for the table

  • Cargo hangs from the tall frame on a fraying rope above the party's heads.
  • The harbour master hangs a warning lantern from the top beam when storms approach.
  • A pirate captain is chained to the frame at low tide as a lesson to the crew.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.