Stairs, pillars and structure

Pier Section 2 3D model

Pier Section 2 from the Poly Haven Props pack in TerrainTale's library. Place it on the grid to add height or cover; the ruler counts the elevation it creates.

Folder
Stairs, pillars and structure
Pack
Poly Haven Props
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
8.5 ft by 11 ft, 12.5 ft tall (covers about 2 by 2 squares)
Format
GLB (binary glTF 2.0)
File size
440 KB
Pier Section 2, a stairs, pillars and structure 3D model for D&D battle maps

About this model

A pier section with a planked deck on weathered posts, one side slightly broken and uneven. The timber is grey and salt-worn. It is about 8.5 ft by 11 ft and around 12.5 ft tall from post foot to deck.

Use it to extend a jetty or to show a pier in poor repair. The rough edge invites players to watch their footing, and the open space below the deck is a good hiding place for smugglers, river monsters or a rowing boat. Mix it with other sections to avoid a repeated look.

Ideas for the table

  • The broken end of the pier hides a rope leading down to a submerged chest.
  • A gang of dockside thugs ambushes the party halfway along the creaking pier.
  • Harbour guards close in from both ends of the pier, and the only escape is into the water.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.