Stairs, pillars and structure

Factory Facade Wall Standard Corner Small 2 3D model

Factory Facade Wall Standard Corner Small 2 from the Poly Haven Modern pack in TerrainTale's library. Place it on the grid to add height or cover; the ruler counts the elevation it creates.

Folder
Stairs, pillars and structure
Pack
Poly Haven Modern
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
6.5 ft by 6.5 ft, 10 ft tall (covers about 1 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
246 KB
Factory Facade Wall Standard Corner Small 2, a stairs, pillars and structure 3D model for D&D battle maps

About this model

A variant of the small brick corner with its own weathering, so short corners can repeat without matching exactly. It is two faces of old red brick at right angles, about 6.5 ft per side and 10 ft tall.

Pair it with the other small corner to give a run of sheds or a narrow industrial lane some variety. Short corners like this break up long sight lines in a street fight and give archers and gunmen a lip to lean out from. They also mark tight turns that a chasing creature has to take slowly.

Ideas for the table

  • Rival gangs exchange shots from opposite small corners across a narrow lane.
  • A trapdoor sits in the ground just inside the corner where the walls meet.
  • A stray cat on the corner keeps knocking over bottles and alerting the guards.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.