Walls, doors and windows

Chainlink Fence Door Gate 3D model

Chainlink Fence Door Gate from the Poly Haven Modern pack in TerrainTale's library. Walls snap onto grid edges; the room tool places them around a rectangle in one motion.

Folder
Walls, doors and windows
Pack
Poly Haven Modern
Author
Poly Haven
Licence
CC0 1.0 (public domain)
Size
3 ft by 0 in, 6 ft tall (covers about 1 by 1 squares)
Format
GLB (binary glTF 2.0)
File size
438 KB
Chainlink Fence Door Gate, a walls, doors and windows 3D model for D&D battle maps

About this model

A single chain-link gate panel with a metal frame, a mesh fill and a small sign plate attached near the latch. It is built to swing open in a fence line. The gate is about 3 ft wide, very thin and 6 ft tall, along one square edge.

Use it to close a fence gateway in a yard, a rooftop or a utility enclosure. A locked gate blocks passage until someone picks it, cuts it or climbs it. Gates are where guards stand and where alarms are wired. A chain and padlock prop sells the lock.

Ideas for the table

  • The gate to the substation is padlocked, and the key hangs on a guard's belt.
  • A gate creaks open in the wind, revealing that someone got into the compound first.
  • Survivors chain the gate shut behind them, trapping the party outside with the horde.

Ready to put a map on the table?

Open the builder and start, no account needed. Sixteen starter scenes are on the welcome screen; sign up free when you want to save one or play it with your group.